Fork oil seals dust cap set 43x54x11mm for Aprilia, BMW, Cagiva, Kawasaki, Triumph

Are you looking for new fork seal rings and want the matching dust caps to go with them? Then you have come to the right place!

DESCRIPTION:
A dirty stanchion is probably the least of your problems with leaking fork seals. Worse is an impairment of the damping, which could result in a deterioration of the road holding. Even greater damage, for man and machine, can be caused by leaking oil, which gets onto the brake system and makes it useless. Order today and make your vehicle safe again! The classic sealing lips on the dust caps provide optimum protection against dirt. Due to their flexible material and the slightly smaller diameter, they lie directly on the standpipe and thus seal it. The Simmerrings have been equipped with an additional spring to provide an even better seal. This set is suitable for vehicles from Aprilia, BMW, Cagiva, Kawasaki and Triumph. The Simmerrings have the following dimensions: inner diameter 43 mm, outer diameter 54 mm and height 11 mm. The total inner/outer diameter is 43 mm and 59 mm for the dust caps. The press-in diameter is 54 mm. A small tip: When renewing the oil seals, they should always be replaced on both sides.

TECHNICAL DATA:
Simmerring
- inner diameter: 43mm
- outer diameter: 54mm
- height: 11mm
- Colour: black
- 3-fold sealing (2x spring, 1x sealing lip)
- Reference number: All Balls 55-120, Ariete ARI 053, Athena P40FORK455093 / P40FORK455056

Dust cap
- inner diameter: 43mm
- Outer diameter total: 59mm
- press-in diameter: 54mm
- Colour: black
- classic sealing lip
- Reference number: All Balls 57-108-1

Set
- Reference number: All Balls 56-133

SCOPE OF DELIVERY:
✔ 2x fork seal rings
✔ 2x dust caps

Eigenschaften: