Battery Lithium Ion 12V 8Ah VTB-4 V-TWIN JMT with charger for Harley Davidson and Kawasaki

You want to rely on the battery in your vehicle and enjoy your independence? Then we have just the right thing for you! Get the lithium-ion battery from JMT including charger!

DESCRIPTION:
This battery is designed for powerful machines.
It is not only extremely vibration-resistant, but also offers the perfect look with its special black, roughened surface.
The battery is very compact and surprisingly light thanks to its high energy density.
You can save up to 5kg in weight by switching from a lead-acid to a lithium-ion battery. And that with the same or even more power!
Unlike lead-acid batteries, which use only 30% of their capacity, JMT lithium-ion batteries use almost 100%!
Consequently, the JMT battery requires only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. A smooth start is guaranteed by the high load capacity of the pole connections and the high cold start power.
The high power density and installation in any position are definitely further advantages of a lithium-ion battery. It has no acid whatsoever, which is why the battery is absolutely leak-proof. No heavy metals were used either.
Because of its long life and safety, you can enjoy your lithium-ion battery for a long time. This high safety standard is guaranteed by the technology - including a built-in processor ("balancer") for the even charge state of all cells - and the manufacturing process (see Technical Data).

TECHNICAL DATA:
Battery
- Lithium Ion battery from JMT
- Type: VTB-4 V-TWIN
- 12V voltage
- 8Ah capacity (10 hours)
- 96Wh energy output
- 420A Refrigeration test current (measuring method: SAE)
- Dimensions: approx. 17.3 x 9.8 x 15.4 cm (LxWxH)
- Weight ready for operation: 1.0 kg
- Connection type: from front
- Positive pole: front right
Minus pole: front left
- without gas discharge
- Production: Lithium polymer process, cathode material iron phosphate (LiFePO4)
Battery charger
- especially for charging lithium-ion accumulators with iron phosphate cathodes, so-called LiFePO4 accumulators
- LED display (red: battery is charging, green: battery is fully charged)
- Input voltage: AC 100-240 V, 50-60 Hz
- Constant voltage: 14.6 V
- Constant current: 1.0 A
- Dimensions of the connector part: approx. 80x53x34 mm
- Length of the battery terminals: approx. 80 mm
- max. opening width of the battery terminals (max. diameter of the battery poles): approx. 28 mm
- Material (cover): Plastic

IMPORTANT NOTES:
- To prevent the battery and charger from overheating, they must not be covered.
- This charger is only suitable for Li-Ion batteries.
- Please note that only suitable chargers may be used for charging.
- The maximum charging voltage of 14.6 volts must never be exceeded. There is a risk of explosion.
- With the aid of adapters, the dimensions of the lithium-ion batteries correspond to the dimensions of the original lead-acid batteries. The connections are also identical, which means that the battery can be replaced in a few minutes without further adjustments.

SCOPE OF DELIVERY:
✔ 1x Battery
✔ 1x charger

Eigenschaften: