Fuel pump + filter + hose Fuel pump 12V In 10mm Out 8mm angled

Is your fuel pump no longer doing what it should? Then we have a replacement for you!

The fuel pump is responsible for ensuring that the carburetor or injection system is supplied with sufficient fuel at a certain pressure. If this is not guaranteed, the pump may fail and your motorcycle will come to a standstill.

Possible causes of pump failure can be contamination inside the pump or a leak. Electrical defects can also cause a standstill. Don't let a broken fuel pump slow you down and replace it with the one offered here!

There's nothing better than getting on your motorcycle and going for a ride on a beautiful day. You can enjoy the feeling of freedom and feel the breeze all over your body.

Technical data:

Fuel pump:
- 12V
- 1 ampere
- Pressure: 2-5 PSI
- Flow rate: 50-60 liters/hour
- Inlet connection: 90° 10mm (3/8"")
- Outlet connection: 90° 8mm (5/16"")
- Length of connection cable approx. 22 cm

Petrol filter:
- Plastic fuel filter
- Connection width : 11 mm

Fuel hose:
- Inner diameter: 9.00 mm
- Outer diameter: 12.00 mm
- Hose wall thickness: 1.50 mm
- Material: Soft PVC (non-porous, smooth)
- Temperature resistant from -20°C to +60°C
- Loadable up to 6.5 bar
- Suitable for connections with an outer diameter of 9.5 to 12.0 mm

Scope of delivery:
- 1x fuel pump
- 1x fuel filter 11mm
- 1m fuel hose 9mm (for 9.5 to 12.0 mm connections)