5x1000ml Wagner rust converter phosphating rust remover deruster - concentrate

Against the brown dirt - the rust converter from Wagner!

Quality is the top priority at Wagner Schmierstoffe. The sale of high quality lubricants, including oils, oil additives and greases is proof of this. The oils have been manufactured in our own production since 1994.

Considerable improvement of the rust protection of metal and adhesion of the final protective treatment with Wagner rust converter. Wagner Rust Converter can also be used for non-ferrous metal surfaces such as aluminium or zinc sheet metal in order to pre-primer bright surfaces.

Immediate stop of corrosion by Wagner Rust Converter, complete derusting is not necessary.

TECHNICAL DATA:
- highly effective rust remover and converter
- Made in Germany, developed and manufactured in Germany
- Ready to use and very easy to apply
- stops corrosion immediately
- very low viscosity, penetrates into all pores
- mechanical derusting or sandblasting completely dented
- Leaves a dull grey rust protection layer (phosphating)
- afterwards directly paintable (without primer)

APPLICATION:
The liquid should be left on the surfaces for 1-2 days. Wet again and again if necessary. If necessary, repeat the treatment. Alternatively, a cloth can be soaked or a paste can be mixed with wood flour or wood grinding dust and water, which adheres to the surface to be derusted. Or an immersion bath can be prepared. Subsequent cleaning with brake cleaner or acetone is necessary if there is a high proportion of rust removed. After drying of the treated surfaces the final protective treatment can be carried out directly.

WAGNER rust converters do not attack aluminium or non-ferrous metals. Also soft or hard solder are not affected in any way. WAGNER Rust Converter is neutral to paint and rubber when used according to instructions. However, at high concentrations, in long-term baths or with pure application, some paints and rubber types can be dissolved if drops or splashes are not neutralized with water and washed off in time. WAGNER Rust Converter works reliably at temperatures as low as 0° Celsius and does not need to be heated up separately.

DOSING:
Do not use Rust Converter alone. Dilute with water in a ratio of 1:1 or 1:2 before applying to the surfaces to be treated. WAGNER Rust Converter works reliably even with a mixing ratio of 1:60 (1 part Rust Converter, 60 parts water).

WAGNER Rust Converter is easy to use, leaves no stains and can be disposed of diluted via the sewage system.

SCOPE OF DELIVERY:
- 5x 1000 ml Wagner rust converter


ATTENTION
Causes severe skin burns and serious eye damage. May be corrosive to metals.

Classification according to CLP regulation