Stainless steel toilet paper holder - without drilling

Mounting option 1: Gluing - is quick and easy.

Clean both adhesive surfaces, on the wall and on the article. The surfaces should be dry, free of dust, grease and wax.
If necessary, mark the desired location for the product on the wall before mounting.
TIP: A small spirit level is great to place on top and ensures a straight installation.
Remove the protective films of one or both 3M stickers and stick the adhesive pads on the toilet paper holder.
Then remove the protective film of the adhesive pad and press the holder firmly to the intended location on the wall for a few seconds.
Do not put any load on the product for about 24 hours after installation.
The adhesive strips are best suited for smooth surfaces such as tiles, smooth stone, marble, glass, mirrors, etc.

Installation option 2: Screw on - holds permanently in place.

Before mounting, mark the desired location for the product on the wall.
TIP: A small spirit level can be placed on top and ensures a straight installation.
Depending on the material of the mounting location, the holes should be pre-drilled and provided with dowels.
Then the article can be fastened with suitable screws.
The toilet paper holder is immediately ready for use.