Fuel pump + filter + hose 6mm fuel pump 12V straight connections

Does your vehicle have poor starting behaviour, occasional engine failures or a decreasing engine power? Then you are in the right place!

DESCRIPTION:
The fuel pump is responsible for supplying the carburetor or the injection system with enough fuel to a certain pressure. If this is not guaranteed, the pump may fail and your motorcycle may stop. Broken bearings, porous seals or electrical defects are just some of the things that can cause the fuel pump to fail. To avoid a standstill of your motorcycle due to these things, we offer you this fuel pump.

There is nothing better than to sit on your bike and take a ride on a beautiful day. You can enjoy the feeling of freedom and feel the wind all over your body.

TECHNICAL DATA:
- 12V
- 1 ampere
- Pressure: 2-5 PSI
- Flow rate: 50-60 Ltr/hour
- Connection inlet: straight 6,5mm (1/4"")
- Connection output: straight 6.5mm (1/4"") - Length of connection cable approx. 22 cm
Fuel filter:
- Plastic fuel filter
- Connection width : 7 mm (6.5 mm)
Fuel hose:
- Inner diameter: 5,00 mm
- Outer diameter: 7.00 mm
- Tube wall thickness: 1.00 mm
- Material: Soft PVC (non-porous, smooth)
- Temperature resistant from -20°C to +60°C
- loadable up to 6,0 bar
- suitable for connections with 5.5 to 7.0 mm outside diameter
SCOPE OF DELIVERY:
- 1x fuel pump
- 1x fuel filter 7mm (6,5mm)
- 1m fuel hose 5mm (for 5,5 to 7,0 mm connections)

Eigenschaften: