Charger for battery 36V 10Ah XH370-10J for e-bikes, pedelecs, electric bicycle e.g. Mifa, Rex, Prophet n

Citomerx charger for EBike batteries 36V/10AH

DESCRIPTION:
When your e-bike's battery runs out of juice, the only thing that helps is the power outlet...
Here you find the suitable charger (from Citomerx) for the luggage carrier battery XH370-10J, which is installed in many E-Bikes and Pedelecs. Whether as a replacement charger, because the old one is defective, or as a second device - this charger does its job reliably. The charger housing is also small and space-saving, so it can easily be stowed in a backpack or bicycle bag.

TECHNICAL DATA:
- Model: LBC100201
- Input: 100-240V / 50-60 Hz / 2.2A
- Output: 42V/2A
- Dimensions: 69 mm x 153 mm x 42 mm
- Connection: hollow plug (inside PLUS / outside MINUS)

IMPORTANT NOTES:
Please check before you buy, if your e-bike has the appropriate battery for the charger!
Procedure for charging the battery
1. make sure that the connection cables are correctly connected
2. compare the output voltage of the battery with that of the charger and make sure that they match
3. connect the plug of the charger to the battery and only then connect the charger to the socket
Notes for the battery display
Red light: In operation, no connection to battery
Orange light: Battery charging
Green light: battery is fully charged
Troubleshooting
1. Possible problem: The red light is off although the device is in operation:
Solution: Check that the charger input connector is plugged into the socket. If there is current flowing from the output, please return the device for repair.
2. Possible problem: The red light does not light up during charging
Solution: Check that the battery and charger connections are properly connected. If this is the case and the battery is still not fully charged, the battery may be defective.
3. possible problem: The red light suddenly turns green
Solution: Check that the battery is fully charged. If not, the charger may be defective. Please send the charger back for repair!
Safety Instructions
1. use the charger indoors if possible and never in rain or wet conditions!
2. when the battery is charged, first remove the plug from the socket. Then you can remove the battery from the charger.
3. do not use the device near explosive gases or sparks. When charging, it is best to store the charger in a well-ventilated room.
4. use the device only for 24V lithium batteries.

SCOPE OF DELIVERY:
✔ Citomerx charger incl. connection cable

Eigenschaften: